DELTA DORE TYMOOV 10F, Manual

Page: 5 / 10

EN
8 9
1/ Motor fitt ing
• Never hit the motor head or output shaft to fi t the motor into the tube.
Never pierce the tube when the motor is installed.
• To attach the apron, use screws that do not enter the tube
by more than 1 mm.
1.1 Crown and wheel assembly
1.2 Assembly in the tube
For attachment and driving accessories as well as mechanical parts,
consult our catalogue.
Model Length for drilling (L) Total length
TYMOOV 10 Nm and 20 Nm 395 mm 422 mm
Tube
L: length for drilling wheel
attachment by screws or rivet
1.3 Motor head position
The motor head must be positioned on the mount such that the cable outlet is in
the lower part when seen horizontally.
1.4 Att aching the motor to the mount
Push the tube/motor (A) onto the mount (B) until it locks into place (click).
8
NO
8
NO
8
NO
4
OK
4
OK
4
OK
Cable
(A)
(B)
“Click”
1
2
Crown
Motor head
Wheel
“Click”
Ensure that you create a loop in the
power cable to prevent water entering
the motor