- 20 -
- 21 -
EN
1.2 CLS 8000 TYXAL+ simple keypad
• Location
The simple keypad should be installed:
- indoors only,
- near one of the main entrances, if possible protected by an intrusion
detector (e.g. DMB TYXAL+ )
- The user must have easy access and it can be mounted on a wall at
a height of 1.50 m.
- Avoid proximity with metal surfaces or an electrical switchboard.
Important: if the simple keypad is protected by a detector (door/win-
dow or motion), you must use a delayed triggering for the detector
when activating it.
• Mounting
~1,50 m
Ê
Separate the 2
parts of the unit.
Ë
Mark and drill holes D1, D2 and D3.
Mount the base using screws V1, V2 and V3.
!
Do not damage or lose the rubber part
C
(required for the tamper alarm).
Lithium battery - AA
LS 14500 3,6 V
1
2
3
UP
HAUT
!
3
D2
D3
D1
!
C
V1
V2
V3
1
2
Ø max = 3 mm
Ì
Fit the battery unit, observing the right
polarity.
Close and lock the unit.
Installing and mounting the products
1
1.1 CS 2000 TYXAL+ control unit
• Location
The alarm control unit should be installed:
- on a fl at surface, with enough space all around
for installation and opening the battery cover.
- in the centre of the system and fi tted in a high position to obtain the
best radio link (avoid basements).
- in an open area to obtain the best dispersion of sound for the inte-
grated siren.
- in an area that is diffi cult for an intruder to locate but
accessible to the user.
- in an area protected by an infrared motion detector.
- at least 2 metres away from any other wireless transmitter.
• Mounting
Remove protective tab
Unscrew
Separate the cover from the rest of the control
unit by pushing up and pulling toward you.
Separate the control
unit from the base.
Separate the parts
Incorrect
Correct
Incorrect
Correct
1
2
C
B
A
D
!
B
B
A
C
D
2
Mark and drill holes
(A, B, C and D)
Fit the mount (screws A and B) to
the wall (do not fi t screws C and D
at this point).
Fit the control unit back on to the mounting
bracket and secure it with the screws (C and D).
= Tamper alarm on opening. Important: do not damage this part of the
support (required for the tamper alarm). Screw back with care.
Fit the mounting bracket
Lithium battery
Bloc pile 2x3.6V, LSH 20
ref. 6416222
3
Connect the battery pack
1
2
1
