![background image](http://html1.mh-extra.com/html/delta-dore/pack-tyxal-compact/pack-tyxal-compact_quick-installation-manual_2475288010.webp)
- 18 -
- 19 -
EN
Activation: main steps
- Install and mount the products
starting with:
- the CS 2000 TYXAL+ siren control unit
- the CLS 8000 TYXAL+ simple keypad
- the DMB TYXAL+ motion detectors
The TL 2000 TYXAL+ remote controls can be programmed (functions of buttons 1 and 2) and associated with the
control of control systems
- Associate your alarm system with the TYDOM application
Personalising the system and the products
- Adjusting advanced settings...
For more detailed explanations, refer to the system guide.
Create installer and user access codes.
You must create your own codes (123456 during activation).
Adding additional products (if necessary)
Products that are not part of the TYXAL+ Compact Pack must be associated with the system:
- intruder detectors and technical detectors,
- keypad, badge reader, remote controls, etc.,
- indoor siren, telephone transmitter, etc.,
To do this, refer to the "Adding products" chapter of the system guide.
Testing the installation
Additional information
Close the alarm control unit
1
5
3
4
6
7
8
9
2
The products in the TYXAL+ Compact Pack were associated in the
factory so as to make them easier to install.
Thank you for purchasing this DELTA DORE alarm pack.
This quick installation guide provides you with the basic installation instructions for your products.
Refer to the system guide for an advanced installation of your Pack.
The TYXAL+ Compact Pack comprises:
- CS 2000 TYXAL+ 1 siren control unit
- TL 2000 TYXAL+ 2 remote controls
- DMB TYXAL+ 2 motion detectors
- 1 simple CLS 8000 TYXAL+ keypad
- 1 TYDOM 1.0. home automation box
Siren control unit
The control unit is the heart of the system
and manages all the information ex-
changed between products.
It sets off the indoor siren in the event of an
alarm.
4-button remote controls
These enable the system to be activated or
deactivated totally or by zone.
Two buttons (1 and 2) can be confi gured for
control of the alarm by zone, the triggering
of a discreet or audible emergency alarm
or control of control systems (e.g. garage
door).
TYDOM 1.0 home automation box
It connects your alarm system to the TY-
DOM application to control your system via
a smartphone or tablet PC either locally or
remotely.
It must be connected to your ADSL box.
CLS 8000 TYXAL+ simple keypad
Wall-mounted, it enables the system to be
activated or deactivated totally or by zone.
Motion detectors
Wall-mounted, they detect any person mov-
ing in the room where they are installed
and report this to the control unit.
The "standard" lens can be replaced with
an "animal" lens (supplied with the prod-
uct).
DMB TYXAL+
CS 2000 TYXAL+
CLS 8000
TYXAL+
TL 2000
TYXAL+