manualshive.com logo in svg

Delta Controls eZV-440, Application Manual

Share
Download
Delta Controls eZV-440 Application Manual Download Page 67

Appendix C: Open Source Licensing 

Page 65 of 67 

eZV-440 Version 2.1 Application Guide 

 

Document Edition 2.5 

 

ST Microelectronics 

Copyright © 2015 STMicroelectronics International N.V.. All rights reserved. 

Redistribution and use in source and binary forms, with or without modification, are permitted, 
provided that the following conditions are met: 

1.

 

Redistribution of source code must retain the above copyright notice, this list of 
conditions and the following disclaimer.  

2.

 

Redistributions in binary form must reproduce the above copyright notice, this list of 
conditions and the following disclaimer in the documentation and/or other materials 
provided with the distribution.  

3.

 

Neither the name of STMicroelectronics nor the names of other contributors to this 
software may be used to endorse or promote products derived from this software 
without specific written permission.  

4.

 

This software, including modifications and/or derivative works of this software, must 
execute solely and exclusively on microcontroller or microprocessor devices 
manufactured by or for STMicroelectronics.  

5.

 

Redistribution and use of this software other than as permitted under this license is void 
and will automatically terminate your rights under this license.  

THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" AND 
ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED 
TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT SHALL STMICROELECTRONICS 
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGE. 

 

Summary of Contents for eZV-440






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands