Delta Controls eZV-440 Application Manual Download Page 39 | Manualshive

Page: 39 / 69

background image

LINKnet I/O Tab

Page 37 of 67

eZV-440 Version 2.1 Application Guide

Document Edition 2.5

Function

Recommended
corresponding
eZNS button

Select this option if you want to:

TempUp_

Increase the temperature setpoint by 0.5 degrees
with each buttonpress. The 0.5 degree amount
cannot be changed in the eZV-440 configurable
model. In the programmable model, this setting
can be overridden using GCL.

If you click the “+” sign next to this option, in the

OccSetpointOffsetReset field, you can turn on
the Occupancy Setpoint Offset Reset function*.

TempSelect_

Set up the button to display the current
temperature and setpoint (if enabled). This button
is usually used to switch to temperature display
mode from fan mode.

If you click the “+” sign next to this option, in the
OccSetpointOffsetReset field, you can turn on
the Occupancy Setpoint Offset Reset function*.

FanDown_

Decrease the displayed fan speed or toggle
through fan stages after FanCycle is pressed.
With analog fans, fan speed will change by this

amount = (FanMaxSpeed – FanMinSpeed) / 6.

FanUp_

Increase the displayed fan speed or toggle
through fan stages after FanCycle is pressed.
With analog fans, fan speed will change by this
amount = (FanMaxSpeed – FanMinSpeed) / 6.

FanCycle_

Set up the button to display the current fan stage.
When the up and down buttons are not available,

toggle this button to select a fan speed.

FanSelect_

Toggle between automatic and manual fan
control. Can be used together with the slider to
manually change the fan speed.

Info_

Toggles between all built-in and input sensor
measurements that the eZNS is reading.

* Occupancy Setpoint Offset Reset resets the occupancy setpoint offset at the start of a new occupancy period.

2.

In the Slider field, select a function that you want to assign to the slider:

Function

Description

NotUsed_

Designate custom behavior using GCL or if you
want a blank slider icon.

AnalogSlider_

Select this if your button overlay contains a slider.
A slider enables users to set values by moving

their finger along the range.

«
...
37
38
39
40
41
...
»

Summary of Contents for eZV-440






































































Reviews:

No comments

Related manuals for eZV-440

Brand: Dantherm Pages: 96

Brand: hager Pages: 2

Brand: hager Pages: 4

CWDM-CR-B Series

Brand: Lantronix Pages: 19

Brand: Netafim Pages: 4

Brand: TREND Pages: 12

SUPERSTAR E-3000/F2

Brand: praher Pages: 10

Brand: IDEC Pages: 97

767-4803/000-800

Brand: WAGO Pages: 80

Vertical Fan Coil

Brand: Solaris Pages: 10

Brand: S&C Pages: 24

OPTISWITCH 5100 C

Brand: KROHNE Pages: 40

Brand: FUTABA Pages: 16

Brand: M-system Pages: 7

Brand: Linear Technology Pages: 5

Brand: Baby Trend Pages: 20

Brand: Guangdong Schen Investment Pages: 15

Brand: Niko Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands