Delta Controls eZFC-424R4-24, Application Manual

Page: 12 / 85

eZFC-424R4-24 Application Guide
Edition 2.6 Page 11 of 84
About the enteliZONE ORCAview Configuration Graphic
The enteliZONE controller configuration graphic in ORCAview provides a user-friendly interface to
configure the controller’s algorithm and its corresponding objects and IO points. Each time a
change is made to a field or option,ORCAview updates the corresponding object references. The
topic enteliZONE Database Configuration Objects lists the fields and options, and their object
references.
In enteliWEB, the configuration page is available as a tab on the Object List page.
Downloading the ORCAview Configuration Graphic
You can download the configuration graphic from the enteliZONE controller product web page on
the Delta Controls Support web site and install it on your operator workstation.
Installing the ORCAview Configuration Graphic
To install the configuration graphic in ORCAview:
1. On your operator workstation, go to the graphic folder C:\Users\Public\Delta
Controls\3.40\Sites\<site name>\Graphics. The site name refers to the site where the
enteliZONE controller you are configuring resides.
2. Copy and paste the configuration graphic zip file into the Graphics folder.
3. Unzip the file.
There are 7 configuration (.gpc) files associated with the enteliZONE controller. Each file
corresponds to a tab on the configuration graphic. The balancing file is not enabled on the eZFC-
424R4-24 or eZ-440R4-230 controller.
Opening the ORCAview Configuration Graphic
There are 2 ways to open the configuration graphic in ORCAview. Make sure the configuration
graphic is installed on your operator workstation before attempting any of these steps.