Model 9320-150 Installation Instructions
Page 8 of 13
Document: RDS-INS9293V, Rev. C
Do not copy or distribute without written permission. Unpublished Work
2019 Delphi Display Systems, Inc. All rights reserved.
Printed copies are Uncontrolled unless clearly marked as a Controlled document. User is responsible for verifying document is the current revision.
Terminate the CAT5E cable using the standard 568B wiring pin-out as shown in the figure below.
Figure 6 - Standard 568B Pinout Detail
To begin the process of assembling the Field Connector kit for connection to the back of the display; First,
place the small compression nut, the grommet, the large compression nut, the o-ring and the housing on
the cable as seen in the figure below.
Figure 7 – Field Connector Assembly Step 1
Next, strip the jacket from the end of the CAT5E cable, and put the parts together loosely (do not tighten) as
shown below.
