Model 9320-150 Installation Instructions
Page 4 of 13
Document: RDS-INS9293V, Rev. C
Do not copy or distribute without written permission. Unpublished Work
2019 Delphi Display Systems, Inc. All rights reserved.
Printed copies are Uncontrolled unless clearly marked as a Controlled document. User is responsible for verifying document is the current revision.
3
System Overview
The model 9320 V-Net display functions as a remote ruggedized outdoor and utilizes a VGA video signal
supplied by an external PC or server device. The V-Net video transmitter converts the VGA signal to a
format that is distributed over standard CAT5 ethernet cable up to distances of 200 ft. Additionally, the
health status and various system parameters of the display can be monitored via a serial connection on the
V-Net transmitter over the same CAT5 cable.
3.1
Front of Display
The front of the display is shown in the figure below. The light sensor and power indicator display is located
in the lower left hand corner of the display. The serial number is located on the front edge of the upper left
corner of the LCD behind the black bezel.
Figure 1 – Front of Display
3.2
Rear of Display
Figure 2 – Rear of Display
Light Sensor / Status Indicator Board
Video Input
(RJ45)
Connector)
120VAC Power
Input
120VAC Power
Indicator Light
Diagnostic Connector –
NOT USED
External Fan Conector -
OPTIONAL
Unit Serial Number (also on rear label)
