Model 9320-150 Installation Instructions
Page 9 of 13
Document: RDS-INS9293V, Rev. C
Do not copy or distribute without written permission. Unpublished Work
2019 Delphi Display Systems, Inc. All rights reserved.
Printed copies are Uncontrolled unless clearly marked as a Controlled document. User is responsible for verifying document is the current revision.
Figure 8 - Field Connector Assembly Step 2
Next, untwist the wires and place them into the correct order for
568B
termination. Cut the length of the
wires down to approx ½ ” (13mm), then terminate the cable with the supplied shielded RJ45 connector as
shown below.
Figure 9 - Field Connector Assembly Step 3
Slide the housing up the cable until the RJ45 connector is seated into the housing. Place one of the two
supplied retainer clips (the other one is a spare) into the slot and ensure it is clipped into place as shown
below.
Figure 10 - Field Connector Assembly Step 4
