26
If the unit is not working properly, this may be due to small problems that you can easily resolve yourself.
Follow these instructions carefully before contacting your local Authorised Technical Service Centre.
Troubleshooting
PROBLEM
REMEDY
The air conditioner is
completely turned
off
•
it is not plugged in
•
there is no electricity
•
the safety device has switched on
•
the timer pin is in the OFF position
•
plug in
•
wait
•
contact the Service Centre
•
adjust the timer
CAUSE
The unit works but
does not cool the
room
•
three minutes have not passed since it was
turned on
•
windows open
•
a heat source is operating in the room (burner,
light, etc.) or there are a lot of people
•
the air outlet hose has come detached from
the coupling
•
thermostat adjusted too high
•
air filters clogged
•
the output of the unit is insufficient for the con-
ditions or size of the room
•
wait three minutes (safety devi-
ce) before the appliance start
cooling.
• close the windows
• eliminate heat sources
• fit the hose in the coupling
• lower the thermostat
• clean/replace
filters
the air conditioner is
on but the applian-
ce doesn't start
•
The teeth of the timer are in the rest mode
•
proceed with a new setting of
the timer
The appliance does
not function and the
problem warning
light is
turned
on.
•
the tube is blocked
•
the tube is twisted or folded
•
the filter is obstructed or dirty
•
remove the blockage from the
tube
•
position the tube correctly
•
press the "manual resetable"
button, which is found inside the
tank housing
GB-5751010800 26-01-2004 16:27 Pagina 26
