12
19
20
Please note!
• For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
• If “Energy saving” mode is enabled, you may have to wait a
few seconds before the drink is delivered.
3. Make sure the milk intake tube (D4)is correctly inserted in
the bottom of the milk container lid (fig. 21);
21
22A
22B
4. Replace the lid on the milk container and press downwards
until it clicks in place;
5. Extract the hot water spout (C6) by pressing the button
(C7) on the spout (fig. 22A);
23
24
6. Attach the milk container to the connection nozzle (A12)
and push as far as it will go (fig. 23). The machine emits a
beep (if the beep function is enabled);
7. Place a sufficiently large cup under the coffee spouts (A11)
and frothed milk spout (D5). Adjust the length of the milk
spout. To move it nearer the cup, simply pull it downwards
(fig. 24);
8. Follow the instructions below for each function.
8.2 Adjusting the amount of froth
Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coffees.
Dial
position
Description
Recommended for…
No froth
CAFFELATTE/
MILK (hot milk)
Min. froth
LATTE MACCHIATO
Max. froth
CAPPUCCINO /
MILK (frothed milk)
8.3 Making cappuccinos and milk-based coffees
automatically
The CAFFELATTE, CAPPUCCINO, LATTE MACCHIATO and MILK but-
tons on the control panel (B) enable these drinks to be prepared
automatically. Proceed as follows:
1. Fill the milk container (D) and attach it as described above;
2. Turn the froth adjustment dial (D1) on the milk container
lid (D2) to the position corresponding to the required froth;
3. Press the button corresponding to the required drink. The
name of the drink selected appears on the display (B4)
together with a progress bar which gradually fills as prepa-
ration progresses;
4. After a few seconds, frothed milk is delivered from the milk
spout (D5) into the cup below. For drinks with coffee, the
machine automatically makes the coffee after delivering
the milk.
Please note!
• If you want to interrupt preparation during delivery, press
any button.
• At the end of delivery, to increase the quantity of milk or
coffee in the cup, just press and hold (within 3 seconds) the
button corresponding to the drink being made.
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
