13
8.4 Cleaning the milk frother using the CLEAN
function
Important! Danger of burns
When cleaning the internal tubes of the milk container (D), a lit-
tle hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
“SET DIAL TO CLEAN” appears on the display (B4) each time you
use a milk function. To eliminate all milk residues, proceed as
follows:
1. Leave the milk container in the machine (you do not need
to empty it);
2. Place a cup or other recipient under the frothed milk spout;
3. Turn the froth adjustment dial (D1) to “CLEAN” (fig. 25). A
progress bar appears on the display and gradually fills as
the operation proceeds together with the message “Clean-
ing underway, Please wait”. Cleaning stops automatically;
26
25
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A12) with a sponge (fig. 26).
Please note!
• To prepare a number of cappuccinos or milk-based coffees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, before cleaning you must wait for the appli-
ance to heat up.
8.5 Programming the quantity of coffee
and milk in the cup for the CAFFELATTE,
CAPPUCCINO, LATTE MACCHIATO and MILK
buttons.
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts (A11) and milk spout
(D5);
2. Press and hold one of the function buttons until the mes-
sage “PROGRAM MILK Program quantity” appears on the
display (B4);
3. Release the button. The appliance starts delivering milk;
4. Once the required quantity of milk has been delivered into
the cup, press the button again;
5. The appliance stops delivering milk and, if required for the
beverage being prepared, after a few seconds the coffee is
delivered into the cup. “PROGRAM COFFEE Program quanti-
ty” is displayed;
6. Once the required quantity of coffee has been delivered
into the cup, press the button again. Coffee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
9. DELIVERING HOT WATER AND STEAM
Important! Danger of burns.
Do not leave the appliance unattended while hot water or steam
is being delivered. The spout becomes hot during delivery. Hold
by the handle only.
Please note!
If “Energy Saving” is active, you may have to wait a few seconds
before hot water and steam are delivered.
9.1 Hot water delivery
1. Make sure the hot water spout (C6) is attached correctly
(fig. 7);
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Press the
button (B5) (fig. 3). “Preparation un-
derway” appears on the display (B4) (if provided for). Hot
water is then delivered and “HOT WATER” is displayed, to-
gether with a progress bar which fills gradually as prepara-
tion proceeds;
4. The machine delivers about 250 ml of hot water, then
delivery stops automatically. To interrupt delivery of hot
water manually, press the
button again.
9.2 Changing the quantity of water delivered
automatically
The machine is set by default to automatically deliver 250 ml of
hot water. To modify these quantities, proceed as follows:
1. Position a container under the hot water spout (C6) (fig. 2);
2. Press and hold the
button (B5) until “HOT WATER
Program quantity” appears on the display (B4), then re-
lease the
button;
3. When the hot water in the cup reaches the required level,
press the
button again.
The machine is now reprogrammed with the new quantity.
9.3 Steam delivery
1. Make sure the hot water spout (C6) is attached correctly
(fig. 7);
