AUTOMATIC OVEN COOKING
To cook food automatically in the oven, it is necessary to:
<
Set the length of the cooking time
<
Set the end of the cooking time
<
Set the temperature and the oven cooking program.
These operations are performed as follows:
<
Set the length of the cooking time by pushing the button and
the button to advance, or to go back if you have passed the desired
time. The AUTO and the symbol will be on.
<
Set the end of the cooking time by pressing the button (the cooking time
already added to the clock time will appear), and the button; if you pass the
desired time you may get back by pushing the button. After this setting,
the symbol will sound. If after this setting, the AUTO flashes on the panel
and buzzer goes off, it means there was an error in the programming.In this
case, modify the end of cooking time or the cooking time itself by following the
above instructions again.
<
Set the temperature and the cooking program by using the switch and thermo-
stat knobs of the oven (see specific chapters).
The oven is now set to turn on and off at the programmed times.
During cooking the symbol remains on.
By pushing the button you can see the time that remains until the end of
cooking.
The cooking program may be cancelled in any time by pushing .
At the end of the cooking time the oven will turn off automatically, the symbol
will turn off, AUTO will flash and the buzzer will sound, which can be turned off by
pushing any of the buttons.
Turn the temperature and thermostat knobs to zero and set the programmer to
“manual” by pressing the button.
Attention: A power cut makes the clock go to zero and cancels the set programs.
After a power cut three zeroes will flash on the panel.
20
Figure 14
Figure 15
