23
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
TURN MILK FROTH
ADJUSTMENT DIAL TO CLEAN
POSITION
CLEAN
Milk has been delivered recently and the tubes
inside the milk container (E) must be cleaned.
Turn the froth adjustment dial (E1) to CLEAN
(fig. 19).
TURN FROTH ADJUSTMENT
DIAL
The milk container has been inserted with
the froth adjustment dial (E1) in the CLEAN
position.
Turn the dial to the required froth position.
DESCALING NEEDED
PRESS OK TO START
(~45MIN)
The machine must be descaled.
Press the selector corresponding to "OK" to
start descaling or "ESC" to descale later. The
descaling procedure described in section "13.
Descaling" needs to be performed.
REPLACE WATER FILTER
PRESS OK TO START
The water softener filter (D7) is exhausted.
Press the selector corresponding to "OK" to re-
place or remove the filter, or "ESC" to carry out
the procedure later. Follow the instructions in
section "15. Water softener filter".
GENERAL ALARM: CONSULT
USER MANUAL/APP
The inside of the appliance is very dirty.
Clean the inside of the appliance thoroughly,
as described in section "12. Cleaning". If the
message is still displayed after cleaning, con-
tact a customer service centre.
The tubes inside the milk container (E) must be
cleaned.
Turn the froth adjustment dial (E1) to CLEAN
(fig. 19).
→
