21
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
FILL BEANS CONTAINER
The coffee beans have run out.
Fill the beans container (A4) (fig. 10).
The pre-ground coffee funnel (A4) is clogged.
Empty the funnel with the help of a brush (D5)
as described in section "12.8 Cleaning the pre-
ground coffee funnel".
GROUND TOO FINE. ADJUST
MILL
The grinding is too fine and the coffee is deliv-
ered too slowly or not at all.
Repeat coffee delivery and turn the grinding
adjustment dial (A5) (fig. 13) one click clock-
wise towards "7" while the coffee mill is in
operation. If after making at least 2 coffees
delivery is still too slow, repeat the correction
procedure, turning the grinding adjustment
dial another click until delivery is correct (see
section "7.5 Adjusting the coffee mill"). If the
problem persists, make sure the water tank
(A17) is fully inserted.
If the water softener filter (D7) is present, an
air bubble may have been released inside the
circuit, obstructing delivery.
Insert the hot water spout (D6) in the appli-
ance and deliver a little water until the flow
becomes regular.
SELECT A MILDER TASTE
OR REDUCE COFFEE
QUANTITY
Too much coffee has been used.
Select a milder taste by pressing the "AROMA"
button (C1) or reduce the quantity of ground
coffee (maximum 1 measure).
INSERT WATER SPOUT
The hot water spout (D6) is not inserted or is
inserted incorrectly
Insert the water spout as far as it will go.
→
