41
EN 11/2010
AWR-MTD2-XE
x3 sec.
** The heat pump is not yet operating, the mode has to be selected: heating, cooling, auto or domestic hot water production.
** AUTO automatic mode changeover based on the outside air temperature
ZONE OFF
Press the
button for 3 seconds
ZONE ON**
Selecting the operating mode
No operating mode selected.
Heat in OFF.
None
Automatic mode changeover
Cooling
Heating
• Press the mode button
• AUTOMATIC** mode changeover
selected
• Press the mode button
• COOLING mode selected
• Press the mode button
• HEATING mode selected
Selecting the room temperature set point
• Turn the knob
• The room temperature set point
is displayed
• Turn the knob to change the room
temperature set point
• Wait a few seconds for confirmation
• The display shows the room tem-
perature
1
2
3
1
2
3
4
OPERATION AND FUNCTIONS OF THE ROOM CONTROLLER
A
Switching ON
The
button enables operation of the pump or the zone valve controlled by the room controller, the heat pump is activated by
selecting the operating mode using the
button, as shown below.
Summary of Contents for AWR-MTD2-XE
Page 69: ......
