Dell XPS 8930, Service Manual

Page: 34 / 142

Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer . After working inside your computer, follow
the instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1 Align the screw hole on the optical-drive bracket with the screw hole on the
optical drive.
2 Replace the screw that secures the optical-drive bracket to the optical drive.
3 Align the tabs on the optical-drive bezel with slots on the optical drive and snap
it in place.
4 Slide the optical drive into the optical-drive cage through the front of the
computer till it snaps into place.
5 Connect the power and data cables to the optical drive.
Post-requisites
1 Follow the procedure from step 9 to step 10 in “ Replacing the power-supply
unit ”.
2 Replace the right-side cover .
Post-requisites
1 Follow the procedure from step 9 to step 10 in “ Replacing the power-supply
unit ”.
2 Replace the right-side cover .
34