Dell XPS 8930 Service Manual Download Page 127

Page: 127 / 142

Table 6. System setup options—Security menu

Security

Unlock setup

Displays if the setup status is
unlocked.

Admin Password Status

Displays whether the admin password
is set.

System Password Status

Displays whether the system password
is set.

HDD Password Status

Displays if the hard drive password is
set.

Admin Password

Displays the admin password.

System Password

Displays the system password.

HDD Password

Displays the hard drive password.

Password Change

Allows you to permit or deny system
password or HDD password changes.
Default: Permitted

Computrace

Enable or disable the BIOS module
interface of the optional Computrace
Service from Absolute Software.

Firmware TPM

Enable or disable the firmware TPM.
Default: Enabled.

UEFI Firmware Capsule Updates

Enable or disable BIOS updates
through UEFI capsule update
packages.
Default: Enabled.

Table 7. System setup options—Boot menu

Boot

Boot List Option

Displays the available boot devices.

File Browser Add Boot Option

Allows you to set the boot path in the
boot option list.

File Browser Del Boot Option

Allows you to delete the boot path in
the boot option list.

127

Summary of Contents for XPS 8930















































































































































Search results

Summary of Contents for XPS 8930

Reviews:

Related manuals for XPS 8930

Brands by name

Popular brands

Dell XPS 8930, Service Manual

Search results

Summary of Contents for XPS 8930

Reviews:

Related manuals for XPS 8930

Brands by name

Popular brands