6.
Insert the card edge connector firmly into the riser card until the card is fully seated.
7.
Replace the screw that secures the expansion card.
8.
Place the expansion card assembly into the system board assembly.
9.
Install the screws that secure the expansion card assembly.
1.
Install the system board assembly.
2.
Reconnect the peripherals and connect the system to the electrical outlet.
3.
Turn on the system, including any attached peripherals.
Related Links
Removing the system board assembly
Installing the system board assembly
Riser card
Figure 26. 1U riser card for 1U node
1.
PCI-E Gen 3 x16
2.
micro SD card socket
Removing the riser card
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Turn off the system, including any attached peripherals.
3.
Disconnect the system from the electrical outlet and disconnect the peripherals.
4.
Remove the system board assembly.
5.
Remove the expansion card.
1.
Remove the screws that secure the riser card to the expansion card bracket.
2.
Pull the riser card away from the expansion card bracket.
61