Dell Vostro 7590, Service Manual

Page: 52 / 91

Steps
1 Align and place the touchpad into the slot on the palm-rest and keyboard assembly.
2 Replace the two (M1.6x2) screws that secure the touchpad to the palm-rest and keyboard assembly.
3 Slide the touchpad cable onto its connector on the system board and close the latch to secure the cable.
4 Align and place the touchpad bracket into the slot on the palm-rest and keyboard assembly.
5 Replace the three (M2x3) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
Next step
1 Install the speakers .
2 Install the battery .
3 Install the base cover .
4 Follow the procedure in After working inside your computer .
Display assembly
Removing the display assembly
Prerequisites
1 Follow the procedure in Before working inside your computer .
2 Remove the base cover .
3 Remove the battery .
4 Remove the WLAN card .
About this task
The figure indicates the location of the display assembly and provides a visual representation of the removal procedure.
52 Disassembly and reassembly