Dell Vostro 7590 Service Manual Download Page 46

Page: 46 / 91

Removing the power button and optional fingerprint reader

Prerequisites

Follow the procedure in

Before working inside your computer

Remove the

Remove the

Remove the

Remove the

Remove the

About this task

The figure indicates the location of the power button with optional fingerprint reader and provides a visual representation of the removal
procedure.

Steps

Remove the two screws (M1.2x2) that secure the power button with optional fingerprint reader to the palm-rest and keyboard
assembly.

Lift the power button with optional fingerprint-reader, along with the fingerprint reader cable, off the palm-rest and keyboard
assembly.

Installing the power button with optional fingerprint reader

Prerequisite

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The figure indicates the location of the power button with fingerprint reader and provides a visual representation of the installation
procedure.

Disassembly and reassembly

Summary of Contents for Vostro 7590




























































































Search results

Summary of Contents for Vostro 7590

Reviews:

Related manuals for Vostro 7590

Brands by name

Popular brands

Dell Vostro 7590, Service Manual

Search results

Summary of Contents for Vostro 7590

Reviews:

Related manuals for Vostro 7590

Brands by name

Popular brands