background image

Option

Description

Enable Intel Speed Shift 
technology

Allows you to enable or disable the Intel Speed Shift Technology option. By default, this option is enabled.

Auto On Time

Allows you to set the time at which the computer must turn on automatically.

The options are:

Disabled

—enabled by default

Every Day

Weekdays

Select Days

USB Wake Support

Allows you to enable USB devices to wake the system from standby. By default, the option 

Enable USB 

Wake Support

 is disabled.

Block Sleep

This option enables you to block entering to sleep in operating system environment. By default, the 

Block 

Sleep

 option is disabled.

Advanced Battery Charge 
Configuration

This option enables you to maximize the battery health. When you enable this option, your system uses 

the standard charging algorithm and other techniques, during the nonwork hours to improve the battery 

health. By default, the 

Enable Advanced Battery Charge Mode

 option is disabled.

Primary Battery Charge 
Configuration

Allows you to select the charging mode for the battery.

The options are:

Adaptive

—enabled by default

Standard

ExpressCharge

Primarily AC use

Custom

If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.

NOTE: 

All charging mode may not be available for all the batteries.

Type-C Connector Power

Allows you to set the maximum power that can be drawn from the type-c connector. The options are:

7.5 Watts—enabled by default

15 Watts

Post behavior

Table 10. POST Behavior

Option

Description

Adapter Warnings

Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power 

adapters.

Enable Adapter Warnings

—enabled by default

Keypad (embedded)

Allows you to choose one of two methods to enable the keyboard that is embedded in the internal 
keyboard. The options are:

Fn Key Only

—enabled by default

By Numlock

78

System setup

Summary of Contents for Vostro 7590




























































































Reviews: