Dell Vostro 7590 Service Manual Download Page 79

Page: 79 / 91

Option

Description

Numlock Enable

Allows you to enable or disable the Numlock function when the system boots.

•

Enable Numlock

—enabled by default

Fn Lock Options

Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their

standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary

behavior of these keys. By default, the

Fn Lock

option is enabled.

Select one of the following options:

•

Lock Mode Disable/Standard

•

Lock Mode Enable/Secondary

—enabled by default

Fastboot

Allows you to speed up the boot process by bypassing some of the compatibility steps.

Select one of the following options:

•

Minimal

—enabled by default

•

Thorough

•

Auto

Extended BIOS POST Time

Allows you to create an additional preboot delay.

Select one of the following options:

•

0 seconds

—enabled by default

•

5 seconds

•

10 seconds

Full Screen Logo

Allows you to display full screen logo, when your image matches screen resolution. By default, the

Enable

Full Screen Logo

option is disabled.

Warnings and Errors

Allows you to select different options to either stop, prompt and wait for user input, continue when

warnings are detected but pause on errors, or continue when either warnings or errors are detected during

the POST process.

Select one of the following options:

•

Prompt on Warnings and Errors

—enabled by default

•

Continue on Warnings

•

Continue on Warnings and Errors

Virtualization support

Table 11. Virtualization Support

Option

Description

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM) can use the additional hardware

capabilities that are provided by the Intel Virtualization technology. By default, the

Enable Intel

Virtualization Technology

option is enabled.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from using the additional hardware capabilities

that are provided by the Intel Virtualization technology for direct I/O. By default, the

Enable VT for

Direct I/O

option is enabled.

System setup

Summary of Contents for Vostro 7590




























































































Search results

Summary of Contents for Vostro 7590

Reviews:

Related manuals for Vostro 7590

Brands by name

Popular brands

Dell Vostro 7590, Service Manual

Search results

Summary of Contents for Vostro 7590

Reviews:

Related manuals for Vostro 7590

Brands by name

Popular brands