Dell VOSTRO 3653 Owner'S Manual Download Page 31

Page: 31 / 37

Default: Not Set

Asset Tag

Allows you to enter your service tag.

Admin Password

Allows you to create an admin password.

HDD Password

Allows you to create an HDD password.

System Password

Allows you to create a system password.

Password Change

Allows you to set the option to change password.
Default: Permitted

Firmware TPM

Allows you to enable or disable the Firmware TPM.
Default: Disabled

HDD Protection

Allows to modify the HDD protection feature.
Default: Disabled

Table 7. — Boot

Boot List Option

Displays the boot modes
Default: UEFI

File Browser Add Boot Option and File Browser Del

Boot Option are actiavted

Secure Boot

Allows you to enable or disable the Secure Boot

control.
Default: Enabled

Legacy Option ROMs

Allows you to load the legacy option ROMs.
Default: Disabled

Boot Option Priorities

Enables you to change the boot option priorities.

Table 8. — Exit

Save Changes and Reset

Allows to save or rest the changes made to the

system setup.

Allows you to discard the changes made to

the system setup.

Allows you to restore the system setup

options to default.

Allows you to discard the changes made to

the system setup.

Allows you to save the changes made to the

system setup.

System Setup Overview

System Setup allows you to:

Summary of Contents for VOSTRO 3653






































Search results

Summary of Contents for VOSTRO 3653

Reviews:

Related manuals for VOSTRO 3653

Brands by name

Popular brands

Dell VOSTRO 3653, Owner'S Manual

Search results

Summary of Contents for VOSTRO 3653

Reviews:

Related manuals for VOSTRO 3653

Brands by name

Popular brands