Installing the Power Switch
1.
Push the power switch into its slot and press it in, until it snaps into place.
2.
Route the power-switch cable through the metal clip.
3.
Connect the power-switch cable to the connector on the system board.
4.
Close the front-bezel door.
5.
Install the:
•
•
6.
After Working Inside Your Computer
Removing the Coin-cell Battery
1.
Before Working Inside Your Computer
.
2.
Remove the:
•
•
3.
Open the
4.
Perform the following steps to remove the coin-cell battery from the system board:
a. Press the release latch until the coin-cell battery pops-out.
b. Remove the coin-cell battery from the system board.
17
