Dell VOSTRO 3653, Owner'S Manual

Page: 20 / 37

c. Slide the system fan to remove it from the computer [3].
Installing the System Fan
1. Place the system fan on the computer.
2. Tighten the screws to secure the system fan to the computer.
3. Connect the system-fan cable to the connector on the system board.
4. Close the front-bezel door.
5. Install the:
a.
bezel
b. cover
6. Follow the procedures in After Working Inside Your Computer .
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
•
cover
• bezel
3. Open the front-bezel door .
4. Remove the:
•
heatsink module
• processor
• expansion card
• memory
• WLAN card
5. Disconnect all the cables from the connectors on the system board.
6. Perform the following steps to remove the system board from the computer:
a. Remove the screws that secure the system board to the computer [1].
b. Slide and lift the system board to remove it from the computer [2].
20