manualshive.com logo in svg

Dell Vostro 3590, Owner'S Manual

Share
Download
Dell Vostro 3590 Owner'S Manual Download Page 81

Option

Description

Strong Password

Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.

NOTE: 

If Strong Password is enabled, the Admin and System passwords must contain at least one 

uppercase character, one lowercase character and be at least eight characters long.

Password 
Configuration

Allows you to specify the minimum and max password lengths of the Administrator and System passwords.

•

min-4—by default, if you want to change you can increase the number.

•

max-32—you can decrease the number.

Password Bypass

Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they 
are set. The options are:

•

Disabled —enabled by default

•

Reboot bypass

Password Change

Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is 
set.
Default setting: 

Allow Non-Admin Password Changes

 is selected.

Non-Admin Setup 
Changes

Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set. 
If disabled, the setup options are locked by the admin password.
Option "Allow wireless switch changes" is not selected by default.

UEFI Capsule 
Firmware Updates

Allows you to enable or disable. This option controls whether this system allows BIOS updated via UEFI capsule 
update packages. The options are:

•

Enable UEFI Capsule Firmware Updates—enabled by default

TPM 2.0 Security

Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:

•

TPM On

—enabled by default

•

Clear

•

PPI Bypass for Enable Commands

—enabled by default

•

PPI Bypass for Disable Commands

•

PPI Bypass for Clear Command

•

Attestation enable

—enabled by default

•

Key storage enable

—enabled by default

•

SHA-256

—enabled by default

•

Disabled

•

Enabled

—enabled by default

NOTE: 

To upgrade or downgrade TPM 2.0, download the TPM wrapper tool—software.

Computrace 

Allows you to activate or disable the optional Computrace software The options are:

•

Deactivate

•

Disable

•

Activate—enabled by default

System setup options

81

Summary of Contents for Vostro 3590
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands