DC-In Port
Removing the DC-in port
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
d
3
To remove the DC-in port:
a Disconnect the DC-in cable from its connector on the system board [1].
b Unroute the DC-in cable from the routing clip on the system [2].
c Remove the M2.5x3 screw that secures the DC-in port to the palmrest [3].
d Lift the DC-in port from the system [4].
Installing the DC-in port
1
Place the DC-in port in its place on the palmrest.
2
Replace the M2x3 screw to secure the DC-in port to the palmrest.
3
Route the DC-in cable through the clip on the system.
4
Connect the DC-in cable to the connector on the system board.
5
Install the:
40
Removing and installing components
Summary of Contents for Vostro 3590
Page 1: ...Latitude 3590 Owner s Manual Regulatory Model P75F Regulatory Type P75F001 ...
Page 15: ...4 Lift the base cover away from the computer Removing and installing components 15 ...
Page 34: ...c Lift the fingerprint reader off the computer 34 Removing and installing components ...
Page 94: ...94 Software ...
