Installing the Input-Output board
1
Place the Input-Output (I/O) board into its slot on the palmrest.
2
Replace the M2x4 screw to secure the I/O board to the palmrest.
3
Connect the I/O board cable to its connector on the system board.
4
Install the:
a
b
5
Follow the procedure in
After working inside your computer
Fingerprint reader – optional
Removing the fingerprint reader
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove the fingerprint reader:
a Disconnect the fingerprint reader cable from its connector on the system board [1], peel the adhesive–backed cable to release it
from the palm rest [2]..
b Remove the M2x2 screw securing the metal bracket of the connector [3] and lift it off the computer [4]
Removing and installing components
33
Summary of Contents for Vostro 3590
Page 1: ...Latitude 3590 Owner s Manual Regulatory Model P75F Regulatory Type P75F001 ...
Page 15: ...4 Lift the base cover away from the computer Removing and installing components 15 ...
Page 34: ...c Lift the fingerprint reader off the computer 34 Removing and installing components ...
Page 94: ...94 Software ...
