Dell Vostro 3401 Service Manual Download Page 3

Page: 3 / 87

Chapter 1: Working on your computer........................................................................................... 6

Safety instructions.............................................................................................................................................................. 6

Chapter 2: Technology and components.......................................................................................10

Chapter 3: Exploded View............................................................................................................ 15

Chapter 4: Disassembly and reassembly.......................................................................................18

Secure Digital Card............................................................................................................................................................ 18

Removing the Secure Digital card............................................................................................................................18
Installing the Secure Digital card..............................................................................................................................19

Base cover.......................................................................................................................................................................... 20

Removing the base cover..........................................................................................................................................20
Installing the base cover............................................................................................................................................ 22

Battery................................................................................................................................................................................. 24

Memory modules............................................................................................................................................................... 29

Removing the memory module.................................................................................................................................29
Installing the memory module...................................................................................................................................29

WLAN card..........................................................................................................................................................................30

Removing the WLAN card.........................................................................................................................................30
Installing the WLAN card............................................................................................................................................31

Solid-state drive................................................................................................................................................................ 32

Hard drive............................................................................................................................................................................36

Removing the hard drive assembly......................................................................................................................... 36
Installing the hard drive assembly............................................................................................................................37

Coin-cell battery................................................................................................................................................................39

Removing the coin-cell...............................................................................................................................................39

Contents

Summary of Contents for Vostro 3401
























































































Search results

Summary of Contents for Vostro 3401

Reviews:

Related manuals for Vostro 3401

Brands by name

Popular brands

Dell Vostro 3401, Service Manual

Search results

Summary of Contents for Vostro 3401

Reviews:

Related manuals for Vostro 3401

Brands by name

Popular brands