Dell U3023E User Manual Download Page 66

Page: 66 / 94

| Operating the monitor

Icon Menu and

Submenus

Description

Menu

Select this option to adjust the settings of the OSD, such
as the languages of the OSD, the amount of time the menu
remains on screen, and so on.

Exit

Input Source

English

Rotation

Transparency

Language

20s

Timer

Disable

Lock

Reset Menu

UltraSharp 30 Monitor

Select

Display

Color

Brightness/Contrast

PIP/PBP

Personalize

Others

USB

Language

Set the OSD display to one of eight languages.

(English, Spanish, French, German, Brazilian Portuguese,
Russian, Simplified Chinese, or Japanese).

Rotation

Rotates the OSD by 0/90/270 degrees.

You can press the joystick to rotate each time.

Transparency

Select this option to change the menu transparency by
moving the joystick up or down (Range: 0 - 100).

Timer

OSD Hold Time:

Sets the length of time the OSD remains

active after you press a button.

Move the joystick to adjust the slider in 1-second increments,
from 5 to 60 seconds.

Summary of Contents for U3023E































































































Search results

Summary of Contents for U3023E

Reviews:

Related manuals for U3023E

Brands by name

Popular brands

Dell U3023E, User Manual

Search results

Summary of Contents for U3023E

Reviews:

Related manuals for U3023E

Brands by name

Popular brands