About your monitor
|
27
Driver installation
Install the Realtek USB GBE Ethernet Controller Driver available for your system. This
is available for download at
https://www.dell.com/support
under the “Driver and
download” section.
Network (RJ45) data rate via USB-C max speed is 1000 Mbps.
NOTE: This LAN port is 1000Base-T IEEE 802.3az compliant, supporting
Mac Address (Printed on model label) Pass-thru (MAPT), Wake-on-LAN
(WOL) from standby mode (S3 only) and UEFI* PXE Boot function[UEFI
PXE Boot is not supported on Dell Desktop PC’s (except for OptiPlex
7090/3090 Ultra Desktop)], these 3 features depend on BIOS settings and
version of the OS. Functionality may vary with Non Dell PC’s.
*UEFI stands for Unified Extensible Firmware Interface.
RJ45 Connector LED Status:
Left LED
Right LED
LED
Color
Description
Right LED
Amber or Green Speed indicator:
• Amber On - 100 0 Mbps
• Green On - 100 Mbps
• Off - 10 Mbps
Left LED
Green
Link / Activity indicator:
• Blinking - Activity on the port.
• Green On - Link is being established.
• Off - Link is not established.
NOTE: RJ45 cable is non in-box standard accessory.
