Dell Studio XPS 13 - Laptop - Obsidian, Owner'S Manual

Page: 56 / 74

56
Display Assembly
8 Gently lift the palm-rest assembly to a 90-degree angle and then release
the palm-rest assembly off the display assembly.
Replacing the Display Assembly
1
Slide and place the palm-rest assembly over the display assembly.
2
Press down on the display hinges and ensure that the screw holes on the
display hinges align with the screw holes on the palm-rest assembly.
3 Replace the screws that secure the display assembly to the
palm-rest assembly.
4 Route the mini-card cables through the routing guides.
5 Slide the touchpad cable into the system-board connector and press down
on the connector latch to secure the keyboard cable.
1 palm-rest assembly 2 screws (4)
3 display hinges (2)
3
1
2
OM_Book.book Page 56 Tuesday, February 28, 2012 10:16 AM