Dell Precision Workstation T7600 Owner'S Manual Download Page 33

Page: 33 / 77

Figure 50.

Remove the screws that secure the front I/O panel and remove it from the computer.

Figure 51.

Installing the Front I/O Panel and the USB 3.0 Ports

Place the USB 3.0 module of the front I/O panel and install the screws to secure it in place.

Place the front I/O panel and install the screws to secure it in place.

Re-seat the front I/O panel assembly on the chassis and secure it to the chassis clips on both sides.

Install the screws that secure the front I/O panel to the chassis.

Connect all the cables to the front I/O panel.

Install the front cover.

Follow the procedures in

After Working Inside Your Computer

Removing the Power Switch

Follow the procedures in

Before Working On Your Computer

Remove the front cover.

Disconnect the power switch cable from the system board.

Remove the front I/O panel.

Press down on the power switch module on the sides to release the power switch from its compartment.

Summary of Contents for Precision Workstation T7600














































































Search results

Summary of Contents for Precision Workstation T7600

Reviews:

Related manuals for Precision Workstation T7600

Brands by name

Popular brands

Dell Precision Workstation T7600, Owner'S Manual

Search results

Summary of Contents for Precision Workstation T7600

Reviews:

Related manuals for Precision Workstation T7600

Brands by name

Popular brands