Dell Precision Workstation T7600 Owner'S Manual Download Page 54

Page: 54 / 77

Option

Description

SMART (Self Monitoring Analysis and

Reporting Technology) specification.

•

Enable SMART Reporting - This option

is disabled by default.

PCI Bus Configuration

Allows you to configure the PCI buses. The

options are:

•

64 PCI Buses (Default)

Audio

Allows you enable or disable the audio

feature.
Default Setting: Audio is enabled

Drives

Allows you to configure the SATA drives on

board. The options are:

•

SATA-0

•

SATA-1

Default Setting: All drives are enabled.

HDD Fans

Allows you to control the HDD fans.
Default Setting: depends on the system

configuration

Table 4. Performance

Option

Description

Multi Core Support

This field specifies whether the processor will

have one or all cores enabled. The

performance of some applications will

improve with the additional cores. This option

is enabled by default. Allows you to enable or

disable multi-core support for the processor.

The options are:

•

All (Default Setting)

•

Intel SpeedStep

Allows you to enable or disable the Intel

SpeedStep feature.
Default Setting: Enable Intel SpeedStep

C States Control

Allows you to enable or disable the additional

processor sleep states.
Default Setting: Enabled

Intel TurboBoost

Allows you to enable or disable the Intel

TurboBoost mode of the processor.
Default Setting: Enable Intel TurboBoost

Non-Uniform Memory Access

Default Setting: Enabled

Summary of Contents for Precision Workstation T7600














































































Search results

Summary of Contents for Precision Workstation T7600

Reviews:

Related manuals for Precision Workstation T7600

Brands by name

Popular brands

Dell Precision Workstation T7600, Owner'S Manual

Search results

Summary of Contents for Precision Workstation T7600

Reviews:

Related manuals for Precision Workstation T7600

Brands by name

Popular brands