Dell Precision T3610 Owner'S Manual Download Page 46

Page: 46 / 65

Option

Description

Deep Sleep Control

Allows you to define the controls when Deep Sleep is enabled.

•

Disabled (Default)

•

Enabled in S5 only

•

Enabled in S4 and S5

Fan Speed Control

Allows you to control the speed of the system fan. The options are:

•

Auto (Default)

•

High

•

Medium

•

Low

USB Wake Support

Allows you to enable USB devices to wake the system from standby.
Default Setting: Disabled

Wake on LAN

This option allows the computer to power up from the off state when triggered by a special

LAN signal. Wake-up from the Standby state is unaffected by this setting and must be

enabled in the operating system. This feature only works when the computer is connected

to AC power supply.

•

Disabled - Does not allow the system to power on by special LAN signals when it

receives a wake-up signal from the LAN or wireless LAN.

•

LAN Only - Allows the system to be powered on by special LAN signals.

This option is Disabled by default.

Block Sleep

Allows you to block entering to sleep (S3 state) in OS Environment.
Default Setting: Disabled

Table 9. POST Behavior

Option

Description

Numlock LED

Specifies if the NumLock function can be enabled when the system boots. This option is

enabled by default.

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots. This option is

enabled by default.

Fastboot

Allows you to speed up the boot process by bypassing some compatibility steps. The

options are:

•

Thorough - This option is enabled by default.

•

Minimal

•

Auto

Table 10. Virtualization Support

Option

Description

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional

hardware capabilities provided by Intel Virtualization technology.

Summary of Contents for Precision T3610


































































Search results

Summary of Contents for Precision T3610

Reviews:

Related manuals for Precision T3610

Brands by name

Popular brands

Dell Precision T3610, Owner'S Manual

Search results

Summary of Contents for Precision T3610

Reviews:

Related manuals for Precision T3610

Brands by name

Popular brands