3.
Press the release latch away from the battery to allow the battery to pop-up from the socket. Lift the coin-cell
battery out of the computer.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery into the slot on the system board.
2.
Press the coin-cell battery downward until the release latch springs back into place and secures it.
3.
Install:
a. cover
b. air tunnel (if available)
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System Fan
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a. cover
b. intrusion switch
c. PCI card
d. hard drive
e. optical drive
3.
Unthread the system-board cable from the latch.
25
Summary of Contents for Precision T3610
