4.
Rotate and pull the bezel panel away from the computer to release the hooks on the opposite edge of the bezel from
the chassis.
Installing the Front Bezel
1.
Insert the hooks along the bottom edge of the front panel into the slots on the chassis front.
2.
Rotate the bezel towards the computer to engage the front-bezel retention clips until they click into place.
3.
Install the cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Optical Drive
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Disconnect the data and power cables from the optical drive.
15
Summary of Contents for Precision T3610
