Dell Precision T3610 Owner'S Manual Download Page 42

Page: 42 / 65

Option

Description

•

SATA2–HDD2

•

SATA2–ODD0

•

SATA3–HDD1

•

SATA2–HDD3

•

SATA2–ODD1

Default Setting: All drives are enabled.

NOTE: If the hard drives are connected to a RAID controller card,

the hard drives will display {none} in all the fields. The hard drives

can be seen in the RAID controller card BIOS.

•

T7610

•

SATA2–ODD0

•

SATA2–ODD1

Default Setting: All drives are enabled.

NOTE: If the hard drives are connected to a RAID controller card,

the hard drives will display {none} in all the fields. The hard drives

can be seen in the RAID controller card BIOS.

SMART Reporting

This field controls if the hard drive errors for the integrated drives are

reported during system startup. This technology is part of the SMART

(Self Monitoring Analysis and Reporting Technology) specification.

•

Enable SMART Reporting - This option is disabled by default.

USB Configuration

Allows you to enable or disable the internal USB configuration. The

options are:

•

Enable Boot Support

•

Front USB Ports

•

Back Quad USB Ports

•

Enable internal USB ports

•

USB3 Ports

PCI Bus Configuration

Allows you to configure the PCI buses. The options are:

•

256 PCI Buses (Default)

•

128 PCI Buses

•

64 PCI Buses

Memory Map IO above 4GB

Allows you enable or disable Memory Map IO above 4GB.

•

Memory Map IO above 4GB - This option is disabled by default.

Optional HDD Fans

Allows you to control the HDD fans.
Default Setting: depends on the system configuration

Audio

Allows you enable or disable the audio feature.
Default Setting: Audio is enabled

SAS RAID Controller (T7610 only)

Allows you to control the operation of the integrated SAS RAID HDD

controller.

Summary of Contents for Precision T3610


































































Search results

Summary of Contents for Precision T3610

Reviews:

Related manuals for Precision T3610

Brands by name

Popular brands

Dell Precision T3610, Owner'S Manual

Search results

Summary of Contents for Precision T3610

Reviews:

Related manuals for Precision T3610

Brands by name

Popular brands