Dell Precision R7610 Owner'S Manual Download Page 2

Page: 2 / 123

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

2013 Dell Inc.

Trademarks used in this text: Dell

™

, the DELL logo, Dell Precision

™

, Precision ON

™

,ExpressCharge

™

, Latitude

™

, Latitude ON

™

OptiPlex

™

, Vostro

™

, and Wi-Fi Catcher

™

are trademarks of Dell Inc. Intel

, Pentium

, Xeon

, Core

™

, Atom

™

, Centrino

, and Celeron

are registered trademarks or trademarks of Intel Corporation in the U.S. and other countries. AMD

is a registered trademark and

AMD Opteron

™

, AMD Phenom

™

, AMD Sempron

™

, AMD Athlon

™

, ATI Radeon

™

, and ATI FirePro

™

are trademarks of Advanced Micro

Devices, Inc. Microsoft

, Windows

, MS-DOS

, Windows Vista

, the Windows Vista start button, and Office Outlook

are either

trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Blu-ray Disc

™

is a trademark

owned by the Blu-ray Disc Association (BDA) and licensed for use on discs and players. The Bluetooth

word mark is a registered

trademark and owned by the Bluetooth

SIG, Inc. and any use of such mark by Dell Inc. is under license. Wi-Fi

is a registered

trademark of Wireless Ethernet Compatibility Alliance, Inc.

2013 - 05

Rev. A00

Summary of Contents for Precision R7610




























































































































Search results

Summary of Contents for Precision R7610

Reviews:

Related manuals for Precision R7610

Brands by name

Popular brands

Dell Precision R7610, Owner'S Manual

Search results

Summary of Contents for Precision R7610

Reviews:

Related manuals for Precision R7610

Brands by name

Popular brands