Dell Precision Compact 3260 Service Manual Download Page 81 | Manualshive

Page: 81 / 93

background image

Table 12. System setup options—Passwords menu (continued)

Passwords

Enable Master Password Lockout

When enabled, this disables the master password support.

By default, the option is disabled.

Allow Non-Admin PSID Revert

Enable Allow Non-Admin PSID Revert

Controls access to the Physical Security ID (PSID) revert of NVMe hard-drives
from the Dell Security Manager prompt.

By default, the option is disabled.

Table 13. System setup options—Update, Recovery menu

Update, Recovery

UEFI Capsule Firmware Updates

Enable or disable BIOS updates through UEFI capsule update packages.

NOTE:

Disabling this option will block BIOS updates from services such as

Microsoft Windows Update and Linux Vendor Firmware Service (LVFS).

By default, the option is enabled.

BIOS Recovery from Hard Drive

Enables the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive or an external USB key.

By default, the option is enabled.

NOTE:

BIOS Recovery from Hard Drive is not available for self-encrypting

drives (SED).

BIOS Downgrade

Allow BIOS Downgrade

This field controls the flashing of the system firmware to previous revisions.

By default, the option is enabled.

SupportAssist OS Recovery

Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain system errors.

By default, the option is enabled.

BIOSConnect

Enable or disable cloud Service operating system recovery if the main operating
system fails to boot with the number of failures equal to or greater than the
value specified by the Auto operating system Recovery Threshold setup option
and local Service operating system does not boot or is not installed.

By default, the option is enabled.

Dell Auto operating system Recovery
Threshold

Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery Tool.

By default, the threshold value is set to 2.

Table 14. System setup options—System Management menu

System Management

Service Tag

Displays the Service Tag of the system.

Asset Tag

Create a system Asset Tag.

AC Behavior

Wake on AC

Enable or disable the wake on AC option.

By default, the option is disabled.

Auto on Time

Enable to set the system to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.

BIOS setup

81

«
...
79
80
81
82
83
...
»

Summary of Contents for Precision Compact 3260






























































































Reviews:

No comments

Related manuals for Precision Compact 3260

Brand: weBoost Pages: 28

Brand: American Communication Systems Pages: 5

Brand: Yaesu Pages: 5

Brand: Sutron Pages: 9

Power Paddle II Antenna

Brand: PSC Pages: 8

Brand: Blaupunkt Pages: 8

Brand: Andrew Pages: 2

FR05-S1-E-0-103

Brand: Fractus Pages: 12

Brand: Ventev Pages: 2

Brand: Jung Pages: 4

15-4CD Skywalker

Brand: CUSHCRAFT Pages: 6

Brand: Lava Pages: 2

Brand: Cabletech Pages: 20

DAT 790 HD BOSS LR

Brand: Televes Pages: 4

Brand: M2 Antenna Systems Pages: 7

Brand: M2 Antenna Systems Pages: 5

SATURN AV-9003S

Brand: Melchioni Pages: 8

Brand: RACOM Pages: 177

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands