NOTE:
If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from
the slot.
Installing the memory modules
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image(s) indicate the location of the memory modules and provide a visual representation of the installation
procedure.
Steps
1.
NOTE:
The thermal pad is applicable only for computers with 32 GB x 2 configuration, install the thermal pad before
installing the 32 GB x 2 memory module.
Align the notch on the memory module with the tab on the memory-module slot.
2. Insert the memory module into the memory-module slot.
3. Press down on the memory module until the memory module snaps into position and the securing clip locks in place.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
NOTE:
The securing clips return to the locked position. If you do not hear the click, remove the memory module and
reinstall it.
Removing and installing components
33
