Dell Precision Compact 3260 Service Manual Download Page 76

Page: 76 / 93

Table 4. System setup options—System information menu (continued)

Overview

Memory Information

Memory Installed

Displays the total system memory installed.

Memory Available

Displays the total system memory available.

Memory Speed

Displays the memory speed.

Memory Channel Mode

Displays single or dual channel mode.

Memory Technology

Displays the technology that is used for the memory.

Devices Information

Panel Type

Displays the Panel Type of the system.

Video Controller

Displays the video controller type of the system.

Video Memory

Displays the video memory information of the system.

Wi-Fi Device

Displays the wireless device information of the system.

Native Resolution

Displays the native resolution of the system.

Video BIOS Version

Displays the video BIOS version of the system.

Audio Controller

Displays the audio controller information of the system.

Bluetooth Device

Displays the Bluetooth device information of the system.

Table 5. System setup options—Boot Configuration menu

Boot Configuration

Boot Sequence

Boot mode

Displays the boot mode.

Boot Sequence

Displays the boot sequence.

Secure Digital (SD) Card Boot

Enable or disable the SD card read-only boot.

By default, the

Secure Digital (SD) Card Boot

option is not enabled.

Secure Boot

Enable Secure Boot

Enable or disable the secure boot feature.

By default, the option is not enabled.

Secure Boot Mode

Enable or disable to change the secure boot mode options.

By default, the

Deployed Mode

is enabled.

Expert Key Management

Enable Custom Mode

Enable or disable custom mode.

By default, the

custom mode

option is not enabled.

Custom Mode Key Management

Select the custom values for expert key management.

Table 6. System setup options—Integrated Devices menu

Integrated Devices

Date/Time

Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.

Camera

Enables or disable the camera.

By default, the

Enable Camera

option is selected

Audio

BIOS setup

Summary of Contents for Precision Compact 3260






























































































Search results

Summary of Contents for Precision Compact 3260

Reviews:

Related manuals for Precision Compact 3260

Brands by name

Popular brands

Dell Precision Compact 3260, Service Manual

Search results

Summary of Contents for Precision Compact 3260

Reviews:

Related manuals for Precision Compact 3260

Brands by name

Popular brands