About this task
The following image(s) indicate the location of the solid-state drive and provides a visual representation of the installation
procedure.
Steps
1. Align the notch on the 2230 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide the 2230 solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x3.5) that secures the 2230 solid-state drive to the system board.
4. Place the computer in an upright position.
Next steps
1. Install the
.
2. Install the
.
3. Install the
.
4. Install the
.
after working inside your computer
.
Removing the M.2 2280 PCIe solid-state drive (slot-0)
Prerequisites
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
Removing and installing components
39
