Dell Precision Compact 3260 Service Manual Download Page 77

Page: 77 / 93

Table 6. System setup options—Integrated Devices menu (continued)

Integrated Devices

Enable Audio

Enable or disable the integrated audio controller.

By default, all the options are enabled.

USB Configuration

●

Enable or disable booting from USB mass storage devices that are
connected to external USB ports.

By default, the

Enable External USB Ports

option is enabled.

●

Enable or disable booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.

By default, the

Enable USB Boot Support

option is enabled.

Disable USB4 PCIE Tunneling

Disable the USB4 PCIE Tunneling option.

By default, the option is disabled.

Video/Power only on Type-C Ports

Enable or disable the Type-C port functionality to video or power only.

By default, the

Video/Power only on Type-C Ports

option is disabled.

Table 7. System setup options—Storage menu

Storage

SATA/NVMe Operation

SATA/NVMe Operation

Set the operating mode of the integrated storage device controller.

By default, the

RAID On

option is enabled.

Storage interface

Port Enablement

This page allows you to enable the onboard drives.

By default, the

M.2 PCIe SSD

option is enabled.

SMART Reporting

Enable SMART Reporting

Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.

By default, the

Enable SMART Reporting

option is not enabled.

Drive Information

M.2 PCIe SSD

Type

Displays the M.2 PCIe SSD type information of the system.

Device

Displays the M.2 PCIe SSD device information of the system.

Enable MediaCard

Secure Digital (SD) Card

Enable or disable the SD card.

By default, the

Secure Digital (SD) Card

option is enabled.

Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.

By default, the

Secure Digital (SD) Card Read-Only Mode

option is not

enabled.

Table 8. System setup options—Display menu

Display

Display Brightness

Brightness on battery power

Enable to set screen brightness when the system is running on battery power.

Brightness on AC power

Enable to set screen brightness when the system is running on AC power.

BIOS setup

Summary of Contents for Precision Compact 3260






























































































Search results

Summary of Contents for Precision Compact 3260

Reviews:

Related manuals for Precision Compact 3260

Brands by name

Popular brands

Dell Precision Compact 3260, Service Manual

Search results

Summary of Contents for Precision Compact 3260

Reviews:

Related manuals for Precision Compact 3260

Brands by name

Popular brands