Disassembly and reassembly
Recommended tools
The procedures in this document may require the following tools:
●
Phillips #0 screwdriver
●
Phillips #1 screwdriver
●
Philips #2 screwdriver
●
Plastic scribe-Recommended for field technician
●
T-30 torx screwdriver
Screw List
The following table shows the screw list and the images for different components.
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Screw type
Quantity
Image
Side cover
M6-32x12.7
1
M.2 2280 Solid-state drive
M2x3.5
1
WLAN card
M2x3.5
1
System Fan
#6-32
1
Processor fan and heat-sink assembly
#6-32
4
Front I/O panel
#6-32
1
System board
#6-32
8
2
Disassembly and reassembly
7
