Dell Precision 3650 Tower Service Manual Download Page 53

Page: 53 / 70

Table 6. System setup options—Storage menu (continued)

Storage

Enable SMART Reporting

Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.

By default, the

Enable SMART Reporting

option is not enabled.

Drive Information

SATA-0

Type

Displays the SATA HDD type information of the computer.

Device

Displays the SATA HDD device information of the computer.

SATA-1

Type

Displays the SATA HDD type information of the computer.

Device

Displays the SATA HDD device information of the computer.

SATA-2

Type

Displays the SATA HDD type information of the computer.

Device

Displays the SATA HDD device information of the computer.

SATA-3

Type

Displays the SATA HDD type information of the computer.

Device

Displays the SATA HDD device information of the computer.

M.2 PCIe SSD-0

Type

Displays the M.2 PCIe SSD-0 type information of the computer.

Device

Displays the M.2 PCIe SSD-0 device information of the computer.

M.2 PCIe SSD-1

Type

Displays the M.2 PCIe SSD-1 type information of the computer.

Device

Displays the M.2 PCIe SSD-1 device information of the computer.

Enable MediaCard

Secure Digital (SD) Card

Enable or disable the SD card.

By default, the

Secure Digital (SD) Card

option is enabled.

Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.

By default, the

Secure Digital (SD) Card Read-Only Mode

option is not

enabled.

Table 7. System setup options—Display menu

Display

Multi-Display

Enable Multi-Display

Enable or disable the Enable Multi-Display buttons on the computer.

By default, the option is enabled.

Primary Display

Video Primary Display

Determines the primary display when multiple controllers are available on the
computer

By default, the

Auto

option is enabled.

Full Screen Logo

Enable or disable full screen logo.

By default, the option is not enabled.

System setup

Summary of Contents for Precision 3650 Tower







































































Search results

Summary of Contents for Precision 3650 Tower

Reviews:

Related manuals for Precision 3650 Tower

Brands by name

Popular brands

Dell Precision 3650 Tower, Service Manual

Search results

Summary of Contents for Precision 3650 Tower

Reviews:

Related manuals for Precision 3650 Tower

Brands by name

Popular brands