Dell Precision 3650 Tower Service Manual Download Page 54

Page: 54 / 70

Table 8. System setup options—Connection menu

Connection

Network Controller Configuration

Integrated NIC

Controls the on-board LAN controller.

By default, the

Enabled with PXE

option is enabled.

Wireless Device Enable

WLAN

Enable or disable the internal WLAN device

By default, the option enabled.

Bluetooth

Enable or disable the internal Bluetooth device

By default, the option enabled.

Enable UEFI Network Stack

Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.

By default, the option is enabled.

HTTPs Boot Feature

HTTPs Boot

Enable or disable the HTTPs Boot feature.

By default, the

HTTPs Boot

option is enabled.

HTTPs Boot Mode

With Auto Mode, the HTTPs Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTPs Boot reads Boot URL from the user-provided data.

By default, the

Auto Mode

option is enabled.

Table 9. System setup options—Power menu

Power

USB PowerShare

Enable USB PowerShare

Enable or disable the USB PowerShare.

By default, the

Enable USB PowerShare

option is enabled

USB Wake Support

Enable USB Wake Support

When enabled, you can use the USB devices like a mouse or keyboard to wake
your computer from standby.

By default, the option is enabled.

AC Behavior

AC Recovery

Enables the system to turn on automatically, when AC is inserted.

By default, the

Power Off

option is enabled.

Active State Power Management

Aspm

Enables or disables the Active State Power Management (ASPM) level

By default, the

Auto

option is enabled.

Block Sleep

Enables to block entering sleep (S3) mode in the operating system.

By default, the

Block Sleep

option is disabled.

Deep Sleep Control

Enable or disable the Deep Sleep mode support.

By default, the

Disabled

option is enabled.

Fan Control Override

Enable or disable the fan control override feature.

By default, the option is disabled.

Intel Speed Shift Technology

Enable or disable the Intel speed shift technology support.

System setup

Summary of Contents for Precision 3650 Tower







































































Search results

Summary of Contents for Precision 3650 Tower

Reviews:

Related manuals for Precision 3650 Tower

Brands by name

Popular brands

Dell Precision 3650 Tower, Service Manual

Search results

Summary of Contents for Precision 3650 Tower

Reviews:

Related manuals for Precision 3650 Tower

Brands by name

Popular brands