Steps
1. Disconnect the hard drive data and power cables from the connectors on the 2.5-inch hard-disk drive module.
2. Press the release tabs on both the sides of the hard-disk drive bracket to release it from the slots on the computer chassis.
3. Lift the hard-disk drive assembly from the computer.
NOTE:
Note the orientation of the hard-disk drive so that you can replace it correctly.
Installing the 2.5-inch hard-disk drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the 2.5-inch hard-disk drive assembly and provides a visual representation of the
installation procedure.
22
Disassembly and reassembly
