Dell PowerVault NX3100 Hardware Owner'S Manual Download Page 46

Page: 46 / 164

Using the System Setup Program and UEFI Boot Manager

Logical Processor
(

Enabled

default)

Each processor core supports up to two logical
processors. If this field is set to

Enabled

, the BIOS

reports both logical processors. If set to

Disabled

only one logical processor is monitored by the BIOS.

Virtualization Technology
(

Disabled

default)

Enabled

permits virtualization software to use the

virtualization technology incorporated in the processor.

NOTE:

Disable this feature if your system will not be

running virtualization software.

Adjacent Cache Line
Prefetch
(

Enabled

default)

Enables high utilization of sequential memory access.

NOTE:

Disable this option for applications that require

high utilization of random memory access.

Hardware Prefetcher
(

Enabled

default)

Enables or disables the hardware prefetcher.

Execute Disable
(

Enabled

default)

Enables or disables

Execute Disable Memory Protection

Technology

Number of Cores per
Processor
(

All

default)

If set to

All

, the maximum number of cores in each

processor is enabled.

Turbo Mode
(

Enabled

default)

If Turbo Boost Technology is supported by the
processor(s), enables or disables

Turbo Mode

C States
(

Enabled

default)

When set to

Enabled

, the processor(s) can operate in all

available power states.

Processor 1 Family -Model-
Stepping

Displays the family, model, and stepping of the selected
processor.

Processor 2 Family -Model-
Stepping

Displays the family, model, and stepping of the
selected processor.

Option

Description

book.book Page 46 Wednesday, March 3, 2010 10:37 AM

Summary of Contents for PowerVault NX3100





































































































































































Search results

Summary of Contents for PowerVault NX3100

Reviews:

Related manuals for PowerVault NX3100

Brands by name

Popular brands

Dell PowerVault NX3100, Hardware Owner'S Manual

Search results

Summary of Contents for PowerVault NX3100

Reviews:

Related manuals for PowerVault NX3100

Brands by name

Popular brands